timothy
bbd7356f81
A stored qsvExtraHardwareFrames of 0 reached FFmpeg as hwupload=extra_hw_frames=0, leaving the QSV upload pool no headroom for frames in flight through the filter graph. Any input that is not throttled then exhausts it: the graph fails with -12 (Cannot allocate memory), h264_qsv reports "Could not open encoder before EOF", and zero segments are written. Measured against the deployed FFmpeg 8.1.2, one real logged command, only the marked tokens differing: readrate 1.05, no burst + frames 0 -> exit 0, 14 segments readrate 1.05 + burst 2/4/8 + frames 0 -> exit 244, ENOMEM, 0 segments no readrate at all + frames 0 -> exit 244, ENOMEM, 0 segments readrate 1.05 + burst 8 + frames 64 -> exit 0, 14 segments no readrate at all + frames 64 -> exit 0, 14 segments So the defect predates #350's cold-start burst: a work-ahead start takes no -readrate and was already failing on a profile with 0. The burst removed the throttle on every realtime session, turning an intermittent failure into a near-deterministic one, which is how it surfaced. Input throttling was doing load-bearing allocation-bounding work that nobody had written down -- which is why the FFmpeg-level benchmark in #350 and the argument-generation tests in #516 were both green and neither could see it. Fixed at FFmpegState.QsvExtraHardwareFrames, the single point every QSV upload site reads, so one guard covers HardwareUploadFilter, HardwareUploadQsvFilter, WatermarkHardwareUploadFilter, ScaleQsvFilter, DeinterlaceQsvFilter and SubtitleScaleQsvFilter rather than six call sites that can drift apart. Values above the floor are still honored. Tests negative-controlled: reverting the floor fails exactly the three sub-minimum cases, with the build verified succeeded first. Refs #350, #516, #519.
docs/ — task-signal map
Purpose: route a fresh contributor/agent to the minimal set of docs for the task at hand, instead of a mandatory front-to-back read. Update this doc in the same PR that adds, removes, or retitles a doc below, or that changes which sections a task signal points to.
Start here, always
CLAUDE.md(repo root) — project intro: architecture, layout, dev commands, conventions, Task Completion Protocol.docs/contributing.md— established code patterns (CQRS/MediatR, LanguageExt, the ChicoryTV SPA, EF Core dual-provider migrations, FFmpeg pipeline, analyzers, testing). Read before any non-trivial change.
Task signal → minimal sections
| Signal | Read |
|---|---|
| Session startup / "what's next" (no issue named) | docs/handoffs/chicorytv-issue-queue.md (standing kickoff — two concurrent tracks: orientation ‖ scripts/select-queue.sh 5) |
| Named-issue pickup | Skip queue selection; go straight to focused retrieval — see "Knowledge retrieval" below, then the issue body |
Adding/changing a /api/* endpoint |
docs/api-conventions.md checklist + docs/endpoint-index.md |
| Adding a ChicoryTV SPA screen | docs/spa-conventions.md |
| Scheduling / playout engine work | docs/domain-model.md + decisions catalog rows keyed sched.* (docs/decisions/README.md) |
| Concurrency / optimistic-locking work | docs/api-conventions.md §7a/b/c + docs/decisions/optimistic-concurrency.md |
| Auth / security-surface work | docs/decisions/api-auth-security.md |
| CI / release pipeline work | docs/ci-cd.md + docs/decisions/release-ci-governance.md |
| Live local run / Playwright-MCP verification | docs/e2e-local.md + scripts/e2e-local.sh |
| What does a test suite cover | docs/testing.md |
| Legacy Blazor route lookup | docs/blazor-route-parity.md (historical #91 phase (b) inventory) |
| "Why do we do X this way" / challenging a convention | Catalog-first: docs/decisions/README.md (active rows) → docs/decisions.md + docs/decisions/*.md for full rationale. docs/decisions/archive/ only for "what did the rule used to be." |
Knowledge retrieval (MemPalace + catalog + Gitea)
These four rules are the seam agreed with server-management#642 (the Gitea→MemPalace exporter). They apply whether the question comes up via MemPalace, a grep, or a stale comment:
- Current conventions/decisions → catalog-first. Start at
docs/decisions/README.md; discover via theErsatzTV-Decisionswing (active) /ErsatzTV-Decisions-Archive(superseded/retired). Resolve by topic/key, never by chasing a file path. - Issue history → evidence, not authority. The
Gitea-ErsatzTVwing is historical narrative that may be stale; it never overrides current Markdown. - The breadcrumb rule (the crux behavior change). A file path named inside a historical issue
comment (e.g. "grep
docs/decisions.md2026-07-17", "see …") is a breadcrumb, not a live pointer. Find the current rule via the catalog / active wing by concept; do not treat the named path as current. (Why it's safe: still-current → in the active wing, breadcrumb resolves; superseded → the active wing returns the successor and a literal follow lands on a record that announces its ownstatus: superseded; retired → the active wing returns nothing, which is itself the signal. The validator-enforced move-to-archive/is what prevents the catastrophic "superseded rule read as current" case.) - Fallback when MemPalace is stale/down:
docs/decisions/README.mdcatalog, thenrg '^`key: <dotted.key>`' docs/decisions/. MemPalace is never authority nor sole fallback.
MemPalace is candidate discovery only — every passage is verified against its cited Markdown/Gitea
source before use. Never derive live queue state from MemPalace, #237, or historical comments; queue
state is live Gitea state, retrieved via scripts/select-queue.sh (see
docs/handoffs/chicorytv-issue-queue.md). Full retrieval contract (altitude/precedence, staleness
bounds, what's mined per issue): docs/handoffs/chicorytv-issue-queue.md → "Knowledge retrieval".
Also present in docs/
docs/domain-model.md— what the app IS: entity glossary, channel→playout→schedule/block concept map, where each concept is edited in the SPA.docs/api-conventions.md— checklist for adding/changing a/api/*endpoint (controllers, DTOs, error mapping, auth, OpenAPI regen, tests).docs/spa-conventions.md— playbook for adding a screen to the ChicoryTV React SPA.docs/e2e-local.md(+scripts/e2e-local.sh) — how to run a live local instance for manual or Playwright-MCP verification.docs/testing.md— testing map: what each*.Testsproject /websuite covers, golden-file nets, the timezone-independence rule, how to run subsets, the per-PR verification gate.docs/blazor-route-parity.md— historical record of the completed #91 phase (b) cutover: the Blazor Server UI is removed and every legacy route now 302-redirects to its SPA equivalent (or falls through to the catch-all →/app). Read it for the full legacy→SPA route inventory.docs/decisions.md+docs/decisions/*.md— active decision records (lifecycle schema: key/status/since/supersedes/superseded-by). Generated active view:docs/decisions/README.md(catalog / task router) — start there. Superseded/retired records live indocs/decisions/archive/and are read only for history, never for "what is the current rule."docs/ci-cd.md— build/test/release pipeline, versioning, dependency management.docs/rest-api.md— REST API design doc for ersatztv#2 (goals, conventions, per-slice plan). Largely superseded day-to-day bydocs/api-conventions.md; read this for the original rationale.docs/mcp.md— theErsatzTV.Mcpstdio JSON-RPC MCP server (#58): how it wraps/api/v1as read + cautious-write tools, its config/env vars, auth, security posture, and the tool catalog.docs/channels.md— Channel entity field reference.docs/m3u-xmltv.md— M3U/XMLTV generation overview (ChannelPlaylist,GetChannelGuideHandler).docs/fork-strategy.md— divergence policy vs upstream ErsatzTV.docs/design-sync.md— Claude Design ↔ repo screen workflow (#92).docs/endpoint-index.md— generated REST endpoint index (method/path/operationId/summary per OpenAPI tag). Do not edit by hand; regenerated byscripts/generate-endpoint-index.py/scripts/update-openapi.sh.docs/handoffs/chicorytv-issue-queue.md— static session kickoff prompt + workflow lore. Queue state is live Gitea state, retrieved each session viascripts/select-queue.sh— see that file's standing kickoff for the two concurrent tracks (orientation ‖ selection). ersatztv#237 is a closed, archival historical tracker (superseded bystartup.parallel-orientationindocs/decisions.md) — not a live pointer.docs/handoffs/rest-api.md— original handoff prompt for kicking off the REST API work (#2).