Out-of-range TimeSpans (25:00:00, 1.06:00:00, negatives) previously
persisted raw while the read side projected .TimeOfDay, so display and
playout behavior diverged silently.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds DecoTemplatesScreen mirroring TemplatesScreen: list mode groups deco
templates by deco template group with create/delete dialogs; editor mode
(/app/deco-templates/{id}) has an add-content row (deco group -> deco ->
start time -> duration hours/minutes pickers), a time-sorted items table
displaying end-of-day items as "24:00", and client-side validation mirroring
ReplaceDecoTemplateItemsHandler's hardened rules (start must precede its
effective end time; no overlapping ranges, with EndTime 00:00:00 treated as
end-of-day for both checks) that disables Save on violation.
No copy action: neither the Blazor DecoTemplateEditor nor the CQRS layer has
a deco-template copy command (unlike Templates, which has both Copy* and a
/copy route), so this isn't a parity gap - just matches upstream scope.
Registered at /app/deco-templates in the primary nav, next to Decos.
Adds DecoTemplateController mirroring TemplateController: CRUD for deco
template groups, deco templates (flat list + by-id), item listing, and a
full-replace PUT for a deco template's item list.
Hardening (deviation from a literal port of the existing handlers, matching
the #144 S2 fix for ReplaceTemplateItemsHandler):
- CreateDecoTemplateHandler now validates DecoTemplateGroupId exists before
insert (previously a bad id hit the FK constraint at SaveChanges and
surfaced as a 500; now a 422).
- ReplaceDecoTemplateItemsHandler now rejects invalid items (unknown DecoId,
StartTime >= EndTime unless EndTime is the end-of-day sentinel 00:00:00,
or overlapping ranges) with a 422 instead of silently dropping/persisting
them - the same silent-drop/silent-overlap bug class already fixed for
templates.
Response DTOs serialize the raw item TimeSpans (via .TimeOfDay), so an
end-of-day item still round-trips as StartTime=22:00:00/EndTime=00:00:00
regardless of the ViewModel's day-wrapping DateTime representation.
UpdateDecoHandler copied every break-content field except MediaItemId,
so TelevisionShow/Season/Artist break content validated then persisted
with a null MediaItemId (upstream bug surfaced by the new REST API).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds the /app/decos screen (dual-mode list/editor) mirroring the legacy Blazor
deco form: deco/watermark/graphics/break-content/default-filler/dead-air
sections with mode-gated controls, watermark/graphics multi-selects, break
content with a playlist group->playlist cascade and per-placement uniqueness,
and default-filler/dead-air typeahead pickers. Adds decos/playlists api modules,
artist/multi-collection search wrappers, and regenerated types.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds DecoController (groups + decos CRUD + full-state PUT), playlist and
artist/multi-collection search picker wrappers, a PlaylistController for the
break-content playlist cascade, and PUT /api/playouts/{id}/deco. Fixes the
CreateDecoHandler missing deco-group existence check (FK 500 -> 422), matching
the CreateBlock/CreateTemplate precedent. ReplaceDecoRequest.ToCommand rejects
Merge on the non-mergeable sections (422).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
GET /api/blocks emits a synthesized negative-id "(none)" row per empty
block group; the block picker was including it as a selectable option.
Filter to b.id > 0, mirroring the backend's real block ids.
Also mirror ReplaceTemplateItemsHandler's new end-of-day validation on
the client: flag an item whose start time + block duration crosses
midnight and disable Save, same as the existing overlap-warning path.
Adds coverage: block picker excludes negative-id rows; validate() flags
a midnight-crossing item.
PUT /api/templates/{id} with an unknown blockId threw KeyNotFoundException
(HTTP 500) because the dictionary indexer assumed every referenced block
had been loaded. Validate all blockIds exist before building the overlap
list and return a 422 with "[BlockId] {id} does not exist." on failure,
matching ReplaceBlockItemsHandler's message convention.
Also reject items whose start time + block duration crosses midnight
(> 24:00). Previously these were silently accepted by PUT, then dropped
by GetTemplateItemsHandler's end-of-day filter on every subsequent GET,
so a saved item would vanish and be deleted on the next save.
Adds a ChicoryTV Templates screen under /app/templates: grouped template
list with group/template create, copy, and delete, and a
/app/templates/{id} editor (name, add-content row that picks a block
group -> block -> five-minute start time, a time-sorted item table with
remove, and a client-side overlap warning that mirrors
ReplaceTemplateItemsHandler's server-side check before allowing save).
Deviates from the Blazor TemplateEditor.razor's drag-to-place day
calendar: uses a plain sorted table + picker row instead, per the S2
spec (parity, not a pixel port).
Adds web/src/api/templates.ts client + copyBlock to blocks.ts (S1 left
the block-copy endpoint unwired; CopyBlock's CQRS shape is identical to
CopyTemplate so it rides along here), plus regenerated v1.d.ts types.
#144 S2 (#162)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds TemplateController mirroring BlockController: groups CRUD, template
CRUD, item replace (PUT full-replace via ReplaceTemplateItems), and a
copy endpoint. Also wires the missing POST /api/blocks/{id}/copy since
CopyBlock's CQRS shape is directly analogous to CopyTemplate.
Fixes CreateTemplateHandler to validate the target template group exists
before insert (previously an unhandled FK violation -> 500), matching the
CreateBlockHandler fix (1e34e00e) for the same class of bug.
New DTOs in ErsatzTV.Core/Api/Scheduling; TimeSpan start times serialize
the same way as PlayoutResponseModel.DailyRebuildTime.
#144 S2 (#162)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
BlocksScreen couldn't load/save blocks containing Artist or
MultiCollection items (creatable upstream; ReplaceBlockItemsHandler
already supports both) - itemFromResponse dropped multiCollectionId
and left selectionName empty for those kinds, and toRequestItem
hardcoded multiCollectionId to null, so re-saving such a block
produced a 422 and made it uneditable. Carry the ids/names through
DraftItem and render them read-only (parity with Blazor, which
doesn't offer these kinds in the creation picker either).
Also key the item AsyncPicker by selection identity + collection
type so switching rows or collection type remounts it with clean
state, instead of carrying over a stale query/options list that
could store a wrong-kind id.
POST /api/blocks with a nonexistent blockGroupId returned an
unhandled DbUpdateException (HTTP 500) because CreateBlockHandler
never checked the referenced block group before inserting, letting
the SQLite FK constraint raise. Add a BaseError validation (422),
matching the "does not exist" precedent already used elsewhere.
Found via live E2E testing.
Adds BlockController (block groups + blocks CRUD, items GET, full replace,
non-persisting preview) mirroring ScheduleController, plus four scheduling
search picker endpoints on SearchController (collections, television shows,
television seasons, smart collections). Response DTOs in ErsatzTV.Core/Api/
Scheduling; request DTOs with ToCommand index auto-assignment.
#144 S1 (#162)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A rejected scripted schedule file no longer leaves DailyRebuildTime
half-applied; the file update is the only fallible step post-pre-check.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Enable the previously-disabled "Add Playout" button on the Playouts screen:
a new dialog picks kind (Classic/Block/Sequential/Scripted/ExternalJson),
channel (annotating channels that already appear in the loaded playouts list
as "already has a playout" -- the channel list DTO has no playout-count
field, so this is a best-effort annotation; a real conflict still surfaces
via the server's 422 in the dialog's error banner), a schedule picker for
Classic, and a schedule-file input with the same helper text as the Blazor
PlayoutEditor for the file-backed kinds. On success the new playout is
selected and the list refreshes.
- Add an "Edit details" affordance on the Playout detail card: a dialog to set
the daily reset time (half-hour options mirroring SchedulePlayoutReset.razor,
plus "Do not automatically reset") and, for Sequential/Scripted/ExternalJson
playouts, the schedule file.
- Add App.test.tsx coverage: classic-playout creation (asserts the POST body
and dialog close), inline 422 error surfacing, daily-rebuild-time edit
(asserts the PUT body), and schedule-file-field visibility gated by kind.
Extends mockDashboardApi with method-aware POST /api/playouts and
PUT /api/playouts/{id} handling.
Regenerate v1.d.ts from the updated OpenAPI spec and add createPlayout()/
updatePlayoutDetails() to the playouts API client, with URL/body-assert tests
following the ffmpegProfiles.test.ts pattern.
- CreatePlayoutRequest now carries a PlayoutScheduleKind discriminator, a
nullable ProgramScheduleId, and a ScheduleFile so POST /api/playouts can
create Classic, Block, Sequential, Scripted, or ExternalJson playouts (not
just Classic). ToCommand() validates per-kind requirements and returns
Either<BaseError, CreatePlayout>, surfacing 422 on mismatched fields via the
existing ToErrorResult() mapping.
- Add PUT /api/playouts/{id} (UpdatePlayoutDetailsRequest): DailyRebuildTime is
always applied (null clears the daily reset, matching the Blazor
SchedulePlayoutReset "Do not automatically reset" semantics); ScheduleFile is
only valid for Sequential/Scripted/ExternalJson playouts (422 otherwise) and
dispatches the matching Update*Playout command.
- Playout existence is checked via GetPlayoutById (real 404) before dispatching
UpdatePlayout, since the command's own "Playout does not exist." validation
produces a plain BaseError (422), not NotFoundError -- an existing quirk in
UpdatePlayoutHandler left as-is (out of scope for this slice).
- Extend ApiErrorResponseMetadataTests + PlayoutControllerTests for the new
Update action and the widened Create action (block/sequential/file-kind
validation paths).
- Regenerate ErsatzTV/wwwroot/openapi/v1.json via update-openapi.sh.
GET /api/library/browse without mediaType now spans all 10 media kinds
(was 4: Movie/TelevisionShow/TelevisionSeason/Artist), which flooded two
pickers with episodes/songs/etc. mixed in with the intended top-level
items. Fan both consumers out per-kind and merge, restoring pre-#168
scoping without touching the API:
- ChannelBuilder's library browse tab now fans out Movie/TelevisionShow/
TelevisionSeason/Artist per page (mirrors the existing loadCollections
pattern) and sums per-kind totalCount so paging/load-more still works.
- CollectionsScreen's add-items search now fans out over the same 4
addable kinds instead of filtering one unscoped page client-side.
Extended App.test.tsx and CollectionsScreen.test.tsx to assert the
per-kind requests and updated a few fixtures that relied on the old
unscoped browse call returning collection-kind items under the library
tab.
The five Libraries polling tests mock window.setInterval to capture the
poll handler, but that handler is registered in a passive useEffect that
only runs after an out-of-act state commit (the async fetch that flips
hasActiveScans). findBy*/waitFor resolve on the DOM mutation via
MutationObserver, which can win the race against React's passive-effect
flush under CI load - leaving intervalHandlers empty when the test
invokes it. The forEach was then a silent no-op: no poll fetch, so
'route delta' timed out at scan-status count > 1, and 'stops polling'
never cleared the 75% label.
Fix: new runPollTick helper flushes pending effects with an empty
act(), asserts the poll handler is actually registered (turning any
future regression into a clear failure instead of a timeout), and
invokes the handlers inside act() so fetch microtasks and state updates
are fully applied before assertions run. All post-tick waitFor blocks
become plain synchronous expects - nothing depends on wall-clock
scheduling anymore. Also aligned the 'stops polling' setInterval mock
with its siblings' >=10000ms cadence filter so it captures exactly the
poll handler, not waitFor's internal 50ms interval callback.
Verified: 20x full App.test.tsx loop under CPU contention, 0 failures;
full vitest suite 202 passed; tsc + eslint clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- MediaBrowseScreen (/app/media): one parameterized screen for all 9 top-level
kinds with an in-screen kind switcher, per-kind search box, 100/page paging
- SearchScreen (/app/search): grouped per-kind results with counts + 'See all';
TopBar search input now navigates here
- TrashScreen (/app/trash): state:FileNotFound results, multi-select + Empty Trash
via DELETE /api/media-items and /api/maintenance/empty_trash (confirm dialogs)
- Shared media/mediaKinds (icon/label maps, hueOf, duration helpers) + MediaPosterCard;
ChannelBuilder and CollectionsScreen now reuse the single-source maps (their
exhaustive Record<LibraryBrowseMediaType> had to cover the 6 new kinds anyway)
- api: search.ts, mediaItems.ts, maintenance.ts (+ URL-assert tests)
- One consolidated 'Browse' nav entry with an in-screen kind switcher instead of
9 per-kind nav rows (deviation from Blazor's per-kind Media links)
- Nav: Media group gains Browse/Search/Trash; Settings Classic-UI help trimmed
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds web/src/api/trakt.ts wrapping the new /api/trakt/* endpoints
(#160) plus URL-assert tests, and web/src/screens/TraktListsScreen.tsx:
a table (slug, name, match count) with add-by-URL, match/refresh,
delete, and a sub-path editor at /app/trakt-lists/{id} (slug read-only,
autoRefresh/generatePlaylist toggles, save via PUT) - same allowSubPaths
pattern as ChannelEditScreen/SettingsScreen. Since add/match/delete are
async background jobs, the screen polls GET /api/trakt/status while
busy (disabling actions) and refreshes the list on the busy -> idle
transition.
"View matched items" links out to the classic Blazor search page
(/search?query=trakt_list:{traktId}) since the SPA has no search
screen yet (#161) - same interim deep-link pattern used elsewhere.
Registered in App.tsx's Media nav group; SettingsScreen's Classic-UI
help text no longer lists trakt now that it's SPA-native.
Adds TraktController (GET/POST /api/trakt/lists, GET/PUT/DELETE by id,
POST .../match, GET /api/trakt/status) covering the API gap for SPA
parity issue #142. Add/match/delete dispatch to the same
ChannelWriter<IBackgroundServiceRequest> the classic Blazor "Trakt
Lists" page uses, gated by the existing IEntityLocker (LockTrakt/
IsTraktLocked) singleton; GET /api/trakt/status wraps IsTraktLocked as
the HTTP-observable substitute for the Blazor page's OnTraktChanged
event. URL validation mirrors AddTraktListHandler.ValidateUrl's regexes
(replicated, since that method is private to the handler and returns a
handler-private record) so an obviously-invalid URL gets a synchronous
422 before dispatch.
Adds TraktListResponseModel/PagedTraktListsResponseModel/
TraktStatusResponseModel DTOs, AddTraktListRequest/UpdateTraktListRequest,
controller tests, ApiControllerSecurityTests + OpenApiErrorResponseContractTests
coverage, and regenerates the checked-in OpenAPI document.
Live E2E found PUT/DELETE on a missing filler preset or watermark returned 422
instead of 404. Root cause: the must-exist checks fed a NotFoundError through
LanguageExt Validation, whose aggregation to Either flattens the BaseError
subtype, so ApiResults.ToErrorResult never saw a NotFoundError. The precedent
handlers (DeleteProgramSchedule, DeleteFFmpegProfile, UpdateProgramSchedule)
avoid this by resolving must-exist as an Option and returning the NotFoundError
directly as an Either Left via Option.Match — restructured the four
filler/watermark Update/Delete handlers to that pattern (remaining name
validation still 422s). No Blazor behavior change (it only reads error.Value).
Verified live: PUT/DELETE missing → 404, GET missing → 404, empty-name POST →
422; happy-path CRUD unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Three new SPA list+editor surfaces, closing the Blazor-only gap found in the
#91 phase-(b) recon:
- FFmpeg Profiles (System group): list with resolution/video/audio summary +
add/copy/delete; full General/Video/Audio editor. Per-hwaccel video-format
and profile rules ported from FFmpegProfileEditViewModelValidator; video
preset list ported from FFmpegLibraryHelper.PresetsForFFmpegProfile /
AvailablePresets.ForAccelAndFormat (cited in code). Resolutions from
/api/settings/resolutions, hwaccel kinds from the new lookup endpoint.
Copy = client-side clone into the create form (no server copy endpoint).
- Filler Presets (Media group): list + editor with the Blazor VM interlocks
(Fallback/Tail force mode None; non-MidRoll clears expression; Fallback
disables chapters; Playlist collection type forces Count mode; duration/
count/pad fields gated by mode). Collection pickers use the existing
/api/library/browse client for all seven collection types incl. Playlist.
- Watermarks (System group): list + editor with mode-driven field enabling,
ChannelLogo vs Custom image source, upload via /api/artwork/uploads
(target=watermark) and preview via /artwork/watermarks/{path}.
- App.tsx: ScreenIds/routes (sub-paths /add + /{id}) and nav registration;
api modules ffmpegProfiles/fillerPresets/watermarks with URL-assert tests;
SettingsScreen Classic-UI help text updated (these are no longer
Blazor-only) and the FFmpeg-profiles card now links to the new screen.
- Regenerated web/src/api/generated/v1.d.ts from the #159 OpenAPI changes.
web verification: typecheck clean; vitest 188/188 (14 files); vite build OK;
eslint clean on touched files.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Backend plumbing for the SPA transcoding editors (#143 blocker):
- FFmpeg profile response DTO round-trip: add NormalizeAudio, NormalizeVideo,
PadMode, TargetLoudness, NormalizeColors, ResolutionId (keep Resolution name
for compat); DeinterlaceVideo now bool (was bool?). #nullable enable on the DTO.
- New GET /api/ffmpeg/hardware-acceleration-kinds wrapping
GetSupportedHardwareAccelerationKinds (returns enum names as strings).
- Filler preset CRUD: GET-by-id/POST/PUT/DELETE on FillerPresetController with
full request/response DTOs; new FillerPresetFullResponseModel +
GetFillerPresetByIdForApi. CreateFillerPreset now returns the new id
(CreateFillerPresetResult) to match sibling Create commands and enable a
201+Location; updated the one Blazor call site.
- Watermark CRUD: GET-by-id/POST/PUT/DELETE on WatermarkController with full
DTOs (path+contentType, all 15 fields); new WatermarkFullResponseModel +
GetWatermarkByIdForApi.
- Startup: register WatermarkLocation/WatermarkSize as OpenAPI string enums
(they live in ErsatzTV.FFmpeg.State and were documented as ints, mismatching
the Newtonsoft StringEnumConverter runtime serialization).
- Tests: full CRUD controller tests for filler + watermark; contract-test
entries (404/401/422) for the new mutating endpoints; regenerated v1.json.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
timothyandClaude Fable 5